| Thu Jul 16, 2015 | Post #1 | JAI PRAKASH
Join date: May 2014 | Depends upon the design.
| | |
|
| Fri Jul 17, 2015 | Post #2 | sandeep yadav
Join date: Jun 2015 |  Post subject: Material quantity
Normal almirah of 7'*3' with two slef and one drawer ,normal -standard almirah ????
| | |
|
| Fri Jul 17, 2015 | Post #3 | JAI PRAKASH
Join date: May 2014 | 4 board or ply - size 7*3/7*4/8*4 - 18 mm 1 back ply - 6 mm Sunmica - 0.8 mm - 8 Fevicol - 3/4 kg Sunmica - 1 mm - 1 Hardware 2 channels Handles Legs
| | |
|
| Sat Jul 18, 2015 | Post #4 | sandeep yadav
Join date: Jun 2015 | Post subject: Quantity calculation
Dear Jai ji
How it is calculated, is their any formula to calculate ???? | | |
|
| Sat Jul 18, 2015 | Post #5 | JAI PRAKASH
Join date: May 2014 | No. Nothing is exact.
| | |
|
| Fri Jul 24, 2015 | Post #6 | Yuri Jones
Join date: Jul 2015 | whcih type of design you want tell me? | | |
|
| Fri Jul 24, 2015 | Post #7 | sanjay agarwal
Join date: Apr 2015 |
The material of almirah will have following parts:
1. Board for Body. The Back will be thin ply while side and shelves will be 12mm Boards. 2. Shutter or Doors which will be 12 mm Board with Laminate / Veneer pasted on it . 3. Hardwar like Handle, Rod, Slider for Drawers 4. Misc. items
You first finalise design and then estimate the material cost. | | |
|
| Fri Jul 24, 2015 | Post #8 | JAI PRAKASH
Join date: May 2014 | Its good to use Ply instead of boards, avoid 12mm for shutters, it should be atleast 15mm. | | |
|
| Sat Jul 25, 2015 | Post #9 | sanjay agarwal
Join date: Apr 2015 | I agree.The Ply/Board should be 18 mm (3/4 inch) .
Advantage of Board over Ply for shutter/door is that Board have wood battens inside. They make the board remain straight and if size is big ( 6-7 feet) this becomes very important. | | |
|
| Tue Jul 28, 2015 | Post #10 | JAI PRAKASH
Join date: May 2014 | It has to be both side laminated if using ply instead of block boards.
| | |
|
|
Bedroom Furniture-Interior Questions (40) | |
|
|