Home -> Forums

How do Engineers calculate the Reinforcement needed for house. Is it possible to

Fri Sep 21, 2018Total posts : 2
Anu Mohan
Anu Mohan
Join date: Jul 2018
Topic: How do Engineers calculate the Reinforcement needed for house. Is it possible to

How do Engineers calculate the Reinforcement needed for house. Is it possible to add more reinforcement bars for more load bearing strength or is any other means used.
Sun Sep 23, 2018Post  #1
Er.S.K.Jain
Er.S.K.Jain

Join date: May 2015
Reinforcement calculation is long RCC design calculation.
Step in general
Calculate load on member including dead load, live load, earthquake load, wind load, snow load.
take suitable section in view of architectural and deflection requirement.
Calculate bending moment, shear force, bond strength etc.
calculate reinforcement as per IS code for bending and shear
check for deflection, bond and serviceability etc

Over reinforcement not suggested as per code it is dangerous as fast failure.
Blind addition of bars are dangerous consult with structural engineer.

 
Tue Sep 25, 2018Post  #2
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear Sir,
  Sh.SK Jain Engineer give you the formula for calculation.
 

Questions (39)

1008
views
1
answers

i am doing my degree as a final year civil engineering in bannari ammman institu

Last answer on 6/26/2014 10:16:25 PM. by Ahmed. Forum started by rohinipriya
7065
views
2
answers

Calculation of column load and footings

Last answer on 9/21/2013 2:07:10 PM. by manishkumar. Forum started by manishkumar
11225
views
2
answers

My engineer has provided door and window details, how to calculate the requireme

Last answer on 6/2/2011 3:56:45 PM. by subhakankhi. Forum started by shekar
1296
views
2
answers

NEED A ADVICE ABOUT EAST FACING PLAN

Last answer on 3/5/2016 9:19:14 PM. by JAI PRAKASH. Forum started by chandru
11674
views
1
answers

HOW TO CALCULATE THE REQUIRED QUANTITY OF BRICKS, CEMENT AND STEEL

Last answer on 7/31/2011 12:54:31 PM. by S L Gupta (Civil Engg). Forum started by sanjay
1240
views
1
answers

Specification of ‘Plastering’

Last answer on 11/7/2013 11:43:21 AM. by S L Gupta (Civil Engg). Forum started by Subash Chander
1314
views
2
answers

South facing house plan

Last answer on 7/20/2015 11:50:00 AM. by seema tyagi. Forum started by Aravinth
8299
views
8
answers

Pillar & plinth beam frame work avoiding stone foundation

Last answer on 5/11/2017 11:22:09 AM. by S L Gupta (Civil Engg). Forum started by tp_bangalore
1022
views
1
answers

I am planning to construct an house in Guntur and it is a 2 road bit and dimensi

Last answer on 3/17/2015 11:46:59 AM. by seema tyagi. Forum started by Narendra Kumar Saranam
652
views
2
answers

SLAB REINFORCEMENT

Last answer on 5/10/2016 2:33:20 PM. by ANKITA MADA. Forum started by ANKITA MADA
1296
views
3
answers

Tiles

Last answer on 8/16/2016 11:35:40 AM. by freekundli. Forum started by Ahmed
38690
views
3
answers

Curing for Brick Walls before and after Plastering

Last answer on 9/23/2013 11:50:55 AM. by S L Gupta (Civil Engg). Forum started by Sambasiva Rao Ravuri
622
views
1
answers

How to calculate in which pads does our design of house main door comes

Last answer on 9/16/2016 7:15:35 AM. by Suprabha. Forum started by Suprabha
270
views
3
answers

What grade of reinforcement bar is most commonly used for homes

Last answer on 9/16/2018 10:58:39 PM. by S L Gupta (Civil Engg). Forum started by Vineeth V
172557
views
98
answers

Construction Cost for RCC Roof / Slabs

Last answer on 4/4/2017 1:05:16 PM. by S L Gupta (Civil Engg). Forum started by Bimlendra Jha
1183
views
1
answers

Building Architect vs. Structure Engineer

Last answer on 12/19/2013 11:17:12 AM. by S L Gupta (Civil Engg). Forum started by mohammed yousuf
1489
views
4
answers

Renovation of old house

Last answer on 5/24/2013 5:06:03 PM. by chandrakanth. Forum started by chandrakanth
70
views
2
answers

I want to by plot size it's a 34.50*31.25*70 is it okay or not for home plz tell

Last answer on 11/19/2018 1:33:15 AM. by S L Gupta (Civil Engg). Forum started by Nisha Sapkal
716
views
1
answers

Sir what will be it's construction cost. And can u give me it's plan

Last answer on 8/17/2016 3:34:19 PM. by Beenu Phogat. Forum started by Hardeep Jatrana
7
views
1
answers

Is it possible to fix compound wall iron gate weighing around 150kg on a 8"x8" r

Last answer on 12/15/2018 1:31:39 AM. by S L Gupta (Civil Engg). Forum started by vinu
1006
views
7
answers

PROJECTIONS

Last answer on 12/15/2018 1:21:34 AM. by S L Gupta (Civil Engg). Forum started by ANKITA MADA
7
views
1
answers

Kindly show me ground floor plan for 29*62 north facing. I wanna 3 bedroom , kit

Last answer on 12/15/2018 1:19:14 AM. by S L Gupta (Civil Engg). Forum started by chander
23
views
3
answers

I want to build bedroom loft of 2 feet extend from wall. The side walls are 11'

Last answer on 12/13/2018 11:45:04 PM. by S L Gupta (Civil Engg). Forum started by Surinder Singh
1798
views
3
answers

sir what should be the minimum thickness of a load bearing wall?

Last answer on 12/13/2018 11:44:32 PM. by S L Gupta (Civil Engg). Forum started by gautam kumar
797
views
4
answers

New constructed kothi inteirior

Last answer on 12/13/2018 11:43:54 PM. by S L Gupta (Civil Engg). Forum started by sanjay jindal
4124
views
4
answers

can anyone suggest better plan for this plot size east facing http://www.gharexp

Last answer on 12/13/2018 11:42:58 PM. by S L Gupta (Civil Engg). Forum started by ashok
1020
views
5
answers

WHAT IS FAVOURABLE DIRECTION ASPER MY DATE OF BIRTH 31-3-1998

Last answer on 12/13/2018 11:41:52 PM. by S L Gupta (Civil Engg). Forum started by PROMOD BATTUR
1678
views
3
answers

Is distance between pillars and cantilevers are a concern??

Last answer on 12/13/2018 11:41:06 PM. by S L Gupta (Civil Engg). Forum started by parimal
3222
views
4
answers

Paint Colors for Home - All rooms

Last answer on 12/13/2018 11:32:53 PM. by S L Gupta (Civil Engg). Forum started by sankar
2137
views
5
answers

Distance between pillars

Last answer on 12/13/2018 11:31:47 PM. by S L Gupta (Civil Engg). Forum started by vinay
24
views
1
answers

Is Fusion-Based Epoxy coating a practical means to prevent corrosion in TMT ste

Last answer on 12/10/2018 11:43:55 PM. by S L Gupta (Civil Engg). Forum started by Anu Mohan
1069
views
2
answers

Find best remodeling contractors

Last answer on 12/10/2018 11:24:39 PM. by S L Gupta (Civil Engg). Forum started by gottashopit
1362
views
7
answers

My homes is opened at north direction,where should I build tulsi vrindavan excep

Last answer on 12/10/2018 2:00:47 AM. by S L Gupta (Civil Engg). Forum started by ashish
75
views
3
answers

My Land and My home is SouthWest direction. I am living here since last 15 years

Last answer on 12/10/2018 2:00:17 AM. by S L Gupta (Civil Engg). Forum started by S Shah
2135
views
16
answers

Sliding Door Window

Last answer on 12/6/2018 2:12:42 AM. by S L Gupta (Civil Engg). Forum started by Snehal Shah
81
views
1
answers

hi my plot siz 28 feet north face wide and 50 feet south side length please give

Last answer on 12/6/2018 2:11:34 AM. by S L Gupta (Civil Engg). Forum started by Vikas Kumar
88
views
3
answers

Please tell me 15*46 right 2bhk house plan

Last answer on 12/5/2018 1:41:36 AM. by S L Gupta (Civil Engg). Forum started by Roshan mallya
122
views
3
answers

What kind of switches are recommended by Vastu for installation at a home/office

Last answer on 12/5/2018 1:41:01 AM. by S L Gupta (Civil Engg). Forum started by Monish Salhotra
50
views
1
answers

Sir I HV a plot 30x56 north facing, I want 3 bedroom,1 drawing room,1 kitchen, 2

Last answer on 12/3/2018 1:39:48 AM. by S L Gupta (Civil Engg). Forum started by meenu jain




Articles that might interest you!
Building
Building Architect vs. Structure Engineer
It is very important to know the difference between architect and structure engineer if you are planning to construct ..
Proper
Proper Ventilation
Proper ventilation freshens our breaths and leads us a healthy life. If you design or modify the house with maximum ve..
What is concrete cover for reinforcement?
The concrete cover for steel bar is very much necessary to protect the steel against corrosion(rusting) and to provide..
Why
Why an Architect should be hired?
We recommend that an architect should be appointed for the construction of any house as the professional help would be..
Septic Tank, It’s Principle and Guidelines
Septic tanks or soak pits are useful for disposal of waste in the areas or houses where public sewerage system is not ..
Planning a House
Once the architect has given his design options, it becomes necessary to select one and start working on it.
Layout of Building
The real meaning and purpose of setting out (layout) is to transfer the plan, length and width of its foundation on th..
Why should cement pointing be done on walls?
According to the drawing , in elevation the outer face shown with out plaster & brick face finishing is required by th..
Painting
Painting Exterior of your Home
For painting exteriors of your home, you should know proper guidelines on primer, paint quality, paint color, weather ..
Environmentally
Environmentally Friendly Houses
An environmentally friendly house is designed and built to be in tune with its occupants, nature, environment and ecos..
What are various types of glasses used in doors?
Types of glasses used in doors-Clear window glass, Plate glass, Prism glass, Quartz glass, Processed glass.......
What are advantages and disadvantages of folding doors?
Advantages of folding doors- Easy to install,washable, durable, superior sound damping. Disadvantages-sensitive to har..
What are various designs available in wooden doors?
Designs available in Wooden doors.....
What is standard size of internal folding doors?
Size, Thickness and Weight of Internal Folding Doors.......
What affects the life of doors? What can we do to increase the life of the Wooden doors?
Tips to increase the life of Wooden doors....
What is the standard size of frame for Plastic/PVC doors?
Plastic Door frame size carrying one or two shutters......
What are various frames recommended for Plastic/PVC doors?
Frames for Plastic Doors..........
Which place is appropriate for sliding door?
Appropriate places for sliding doors-Bathrooms, Backyards, Commercial structures...........
What are various frames recommended for glass doors?
Frames for Glass Doors-Wooden frames, Steel frames, Aluminium frames......
Which place is appropriate for folding doors?
Appropriate places for folding doors-Homes, Offices, Guest rooms, gives attaractive and stylish look........
What are the various accessories recommended for folding doors?
Accessories for folding doors- Door Handles, Door Fasteners,Door Viewers.......
What affects the life of doors? What can we do to increase the life of the Plastic/PVC doors?
Tips to increase the life of Plastic doors....
Copyright 2007- GharExpert.com All rights reserved.  

 
 |  Advertize with us  |  About us  |  Contact us  |  RSS  |  Blog  |  Terms of service  |  Style made simple  |  Decorating slide show  |  Tips  |  Give your feedback  |