|
| The following tools are recommended for plumbing of sanitary fittings: |
|
| Plier |
|
| Parrot plier |
|
| Spanner set |
|
| Pipe Wrench |
|
| Adjustable Wrench |
|
| Chain Wrench |
|
| File |
|
| Pipe vice |
|
| Hand hacksaw |
|
| Pipe die stock |
|
| Tap wrench and tap |
|
| Steel measuring tape |
|
| Calipers |
|
| Hammer |
|
| Steel rule |
|
| Trowel |
|
| Screw driver |
|
| Try square |
|
| Bench vice |
|
| Chisels |
|
| Spirit level |
|
| Caulking tools |
|
| Ratchet Brcce |
|
| Gainti (Pick axe) |
|
| Kassi ( Spade) |
|
| Three Wheel Pipe Cutter |
|
| Plier: |
|
| Plier is a hand tool primarily used for gripping and cutting. It is a common tool to many handy trades and occupations. |
|
| Parrot plier: |
|
| This is an another shape of plier. |
|
| Spanner set: |
|
| Spanner set is a tool usually operated by hand to tighten bolts and nuts. A wrench basically consists of a lever with a notch at one or both ends for gripping the bolt or nut. |
|
| Pipe Wrench: |
|
| A pipe wrench is a tool with two serrated jaws, one adjustable for gripping and turning pipe. |
|
| Adjustable Wrench: |
|
| An adjustable wrench has an adjustable head to fit various sizes of nuts and bolts. This wrench can be made to fit different sized fasteners. |
|
| Chain wrench: |
|
| A wrench used for turning large pipes an adjustable chain circles the pipe with its ends connected to the head whose teeth engage the pipe. |
|
| File : |
|
| It is used to sharpen/ grind the pipe. |
|
| Pipe vice: |
|
| It is used for gripping the pipe. |
|
| Hand hacksaw: |
|
| A hacksaw is a saw for cutting metal or bones. Some of them have pistol grips which keep the hacksaw firm and easy to grip. They also cut in straight lines. |
|
| Pipe die stock: |
|
| A device used for cutting out, forming, or stamping material. |
|
| Tap wrench and tap: |
|
| A tap wrench is a hand tool used to operate any small tool that has a square driving head as part of its body. These are usually cutting tools of which the most common are taps. Other small hand tools such as hand reamers might employ a tap wrench. |
|
| Steel measuring tape: |
|
| A measuring tape is a ribbon of cloth, plastic, or metal with linear-measure markings. |
|
| Calipers: |
|
| Caliper is an instrument used to measure the diameter of any object. |
|
| Hammer: |
|
| A hand tool with a heavy rigid head and a handle used to deliver an impulsive force by striking |
|
| Steel rule: |
|
| A flat, steel, linear measuring instrument with varying levels of graduations: 1/4, 1/8, 1/16, 1/32 and 1/64 for standard inch and 1 or 0.5 mm for metric. |
|
| Trowel: |
|
| Trowel is a small hand tool with a handle and flat metal blade; used for digging or spreading plaster or similar materials |
|
| Screw driver: |
|
| A tool for turning screws so as to drive them into their place. It has a thin end which enters the nick in the head of the screw. |
|
| Try square: |
|
| A try square is a tool used for marking and measuring a piece of wood. The Square refers to the primary use of the tool. It measures the accuracy of a right angle. It is a piece of wood that is rectangular, flat and has all the edges (faces, sides, ends) at 90 degrees. |
|
| Bench vice: |
|
| A holding device attached to a workbench has two jaws to hold work piece firmly in place. |
|
| Chisel: |
|
| A chisel is a tool for cutting a hard material such as wood or stone or metals. A chisel is typically made of hardened/tempered steel. It is more rarely a common steel which consists of a sharpened end (called the blade) attached to a straight handle. The handle and blade of some types of chisels are made in one piece. |
|
| Spirit level: |
|
| A spirit level is an instrument designed to indicate whether a surface is leveled . |
|
| Caulking tools: |
|
| Caulking is a process used to seal the seams in wooden boats or ships or steel ships in order to make them watertight or to close up gap/crack in buildings against water, air, dust or insects. |
|
| Caulking tube |
|
| Ratchet Brace: |
|
| Ratchet brace is equipped with a four-jaw chuck suitable for bit stock, round or hex shanks. |
|
| Gainti (Pick axe): |
|
| A pick axe is especially with one end of the head pointed and the other end with a chisel edge for cutting. |
|
| Kassi (Spade): |
|
| A strong digging tool having a thick handle and a heavy, flat blade that can be pressed into the ground with the foot. |
|
| Three Wheel Pipe Cutter: |
|
| It is used for cutting the pipes. |
|