|
The following tools are recommended for fitting the soil water work. |
|
Plier |
|
Parrot plier |
|
Spanner set |
|
Pipe Wrench |
|
Adjustable Wrench |
|
Chain Wrench |
|
File |
|
Pipe vice |
|
Hand hacksaw |
|
Pipe die stock |
|
Tap wrench and tap |
|
Steel measuring tape |
|
Calipers |
|
Hammer |
|
Steel rule |
|
Trowel |
|
Screw driver |
|
Try square |
|
Bench vice |
|
Chisels |
|
Spirit level |
|
Caulking tools |
|
Ratchet Brcce |
|
Gainti (Pick axe) |
|
Kassi ( Spade) |
|
Three Wheel Pipe Cutter |
|
1. Plier: |
|
Plier is a handy tool primarily used for gripping and cutting. It is a common tool for many handy trades and occupations. |
|
2. Parrot plier: |
|
Parrot plier is another shape of plier. |
|
3. Spanner set: |
|
Spanner set is a tool usually operated by hand to tighten the bolts and nuts. |
|
4. Pipe Wrench: |
|
A pipe wrench is a tool with two serrated jaws, one adjustable for gripping and turning pipe. |
|
5. Adjustable Wrench: |
|
An adjustable wrench has an adjustable head to fit into various sizes of nuts and bolts. This wrench can be fitted into the fasteners of different sizes. |
|
6. Chain wrench: |
|
Chain wrench is used for turning large pipes an adjustable chain circles the pipe with its ends connected to the head whose teeth engage the pipe. |
|
7. File: |
|
The file is used to sharpen/ grind the pipe. |
|
8. Pipe vice: |
|
Pipe vice is used for gripping the pipe. |
|
9. Hand hacksaw: |
|
Hacksaw is used for cutting metal or bones. Some hacksaws have pistol grips which keep the hacksaw firm and easy in the grip. They also cut in straight lines. |
|
10. Pipe die stock: |
|
A device used for cutting out, forming or stamping materials. |
|
11.Tap wrench and tap: |
|
Tap wrench is a handy tool to operate any small tool that has a square driving head as a part of its body. These are usually cutting tools. Other small handy tools such as hand reamers might employ a tap wrench. |
|
12. Steel measuring tape: |
|
Steel measuring tape is a ribbon of cloth, plastic or metal with linear-measure markings. |
|
13.Calipers: |
|
Caliper is an instrument used to measure the diameter of any object. |
|
14. Hammer: |
|
Hammer is a handy tool with a heavy rigid head and a handle used to deliver an impulsive force by striking. |
|
15. Steel rule: |
|
Steel rule is a flat, steel, linear measuring instrument having different levels of graduations such as 1/4, 1/8, 1/16, 1/32 and 1/64 for standard inch and 1 or 0.5 mm for metric. |
|
16. Trowel: |
|
Trowel is a small handy tool with a handle and flat metal blade which are used for digging, spreading plaster or similar materials. |
|
17. Screw driver: |
|
Screw driver is a tool used for driving screws into their place. It has a thin end which enters the nick in the head of the screw. |
|
18. Try square: |
|
A try square is a tool used for marking and measuring a piece of wood. Square refers to the primary use of the tool. It measures the accuracy of a right angle. It is a piece of wood that is rectangular, flat having all the edges (faces, sides, ends) at 90 degrees. |
|
19. Bench vice: |
|
Bench vice is a holding device attached to workbench which has two jaws to hold work piece firmly in place. |
|
20. Chisel: |
|
A chisel is a tool used for cutting a hard material such as wood, stone or metals. It is typically made of hard/tempered steel. It is rarely made of common steel which consists of a sharp end (called the blade) attached to a straight handle. The handle and blade of some chisels are made of one piece. |
|
21. Spirit level: |
|
A spirit level is an instrument designed to indicate whether a surface is leveled or not. |
|
22. Caulking tools: |
|
Caulking is a process used to seal the seams in wooden boats, in the ships or in the steel ships in order to make them watertight or to fill in the gap/crack in the buildings.
There are two chaulking tools which are following. |
|
Caulking gun://Matter not found |
|
Caulking tube:://Matter not found |
|
23. Ratchet Brace: |
|
Ratchet brace is equipped with a four-jaw chuck suitable for bit stock, round or hex shanks. |
|
24. Gainti (Pick axe): |
|
A pick axe has one special end of the head pointed and the other end has a chisel edge for cutting. |
|
25. Kassi (Spade): |
|
Kassi is a strong digging tool having a thick handle and a heavy, flat blade that can be pressed into the ground. |
|
26. Three Wheel Pipe Cutter: |
|
Three wheel pipe cutter is used for cutting the pipes. |
| |