|
| The following tools are recommended for electrical fitting in home. |
|
| 1.Connector Screw driver (10 cm) |
|
| 2.Neon Tester |
|
| 3.Adjustable Screw Spanner (15cm) |
|
| 4.Electricians' Knife |
|
| 5.Electricians' pliers (15cm) |
|
| 6.Insulated Nose Pliers (10cm) |
|
| 7.Wire Cutter (15cm) |
|
| 8.Screw driver (15cm) |
|
| 1. Connector Screw Driver (10cm): |
|
| It is a small screw driver used for fixing tiny screws on the holders, on the plug pins and on the sockets. |
|
|
| 2. Neon Tester: |
|
| It is used for testing the supply. Phase wire is identified by the glow of light in the tester when tip of the tester is placed on the wire. Tester is provided with a screw driver but this should be used carefully. |
|
|
| 3. Adjustable Screw Spanner (15cm): |
|
| It is used to loose and tighten the nuts and bolts in electrical appliances. The spanner can be adjusted to suit the width of the nut or bolt head. |
|
|
| 4. Electricians' Knife: |
|
| It is made of steel and has folding nature. It is used for removing insulation and for cleaning wires. |
|
|
| 5. Electricians Pliers (15cm): |
|
| It is used for cutting, twisting and pulling wires. Cutting pliers are specified in lengths and are available in range of 15 to 30 cms. Handles of the pliers have insulation jacket to provide safety from electric shock. |
|
|
| 6. Insulated Nose Pliers (10cm): |
|
| It is used for holding the nuts and screws in such places where space is limited. Therefore the jaws of such pliers are made long. |
|
|
| 7. Wire Cutter (15cm): |
|
| It consists of two sharp edges which can cut the wire. |
|
|
| 8. Screw Driver (15cm): |
|
| It is provided with an insulating handle which is used for fixing the screws. It is available in various sizes. |
|
|