Aluminum door advantages and disadvantages

Door is essential part of the house or building, as door is a solid barrier fixed in door way or opening in a wall and it provides safety and privacy. It consists of two parts i.e. frame and shutter and can be opened for access to and from buildings, between rooms. According to material doors can be classified as wooden doors, iron doors, PVC or plastic doors and aluminum doors etc, which are available in the market. Now a day’s aluminum doors, windows and glazing are widely used. 

In commercial building aluminum, doors are mostly in use and these are serving the purpose to enhance the beauty of commercial complex according to architect requirement. Aluminum alloy standard extruded sections are used for fabrication of aluminum doors. The chemical composition and mechanical properties of these extruded sections should comply with the requirements of IS 733, IS 1285, IS 737. Aluminum is corrosion resistance and it is inert to Sulphur. Aluminum alloy extruded sections in different forms used in the manufacture of frames and shutters of doors and windows and supports for hand rails, wall facing, partitions and similar other applications, where surface finish is important and medium strength would suffice shall conform to IS733 and IS1285.

There are some advantages and disadvantages of aluminum doors over the other doors as wooden doors and iron doors etc.


  • Aluminum doors provide beauty, warmth and style.
  • Aluminum door are most environmental friendly in comparison of wooden door.
  • They have long life have no effect of rust, corrosion and termite effect.
  • Clean easily simply by dusting and washing.
  • They have less maintenance cost.
  • Aluminum doors are good choice for commercial building and offices.
  • They provide weatherproof quality.
  • Aluminum door require no any periodical or annual expenditure on paint or polish.


  • Aluminum doors will oxidant. This oxidation appears as white residue and pitting( cavity)
  • Aluminum can be water stained easily.
  • Aluminum can corrode quickly if suitable precautions against electrolysis are not taken.
  • Welding of aluminum requires specialized equipment, hence costly.
High Wind can affect the life of door, if it is not properly shut down.
A board which is made by joining two or three layers is called plywood board.
Roller doors are designed to give thermal and insulation properties much higher than the average garage door.
The entry doors should not only be chosen for security purposes but for designing point of view also.
Lobby is the place where you spend most of your time and hence, it is frequently used. Therefore, it requires a revolving door that also controls the temperature of the room.
Guest room is a place of attraction where relaxing and formal appearance with a touch of style is required.
Termites travel in tale tubes and are supposed to eat away wood that leads to the great loss.Use termite detector to check the presence of termites
To avoid weakening and ageing through the influence of moisture and sunlight, a wooden door should always be covered with
For small bathrooms, a sliding door works well as it takes less space to open or close.
Panel doors can consist of one to six wooden panels; but this may be increased.Hollow core wooden doors are usually for interior use only.
Thermo foil (PVC i.e. polyvinyl chloride) kitchen cabinets are a great choice for your kitchen.
Wood provides insulation that is 400 times more effective than steel and 1800 times more effective than aluminum.
Available in various types i.e. cast iron, wrought iron etc.Tough and durable
The glass doors add richness, light, beauty and charm to any doorway in your home.
Various accessories recommended for wooden doors are
Kota stone flooring is a subtle blend of grandeur and luxury giving the interior and exterior a gorgeous look.......
To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.
Preview some of the most impressive pictures of kitchen from GharExpert Gallery.
A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.
Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.
How to be a Leader: Start with 3 simple steps

Copyright 2007- All rights reserved.