What are the advantages of metallic pipes for plumbing?

;

What are various systems of water supply?

There are two systems of water supply which are given below. The supply is given to the various floors directly from the street which has enough pressure to feed them directly.

What are various types of valves for water pipe lines?

Valve is suitable means of connections for inserting and controlling the flow of the water.Nominal size of stop valve is designated by the nominal bore of the pipe to which valve is normally fitted.

Which are various types of valves for plumbing?

Valve is suitable means of connections for inserting and controlling the flow of the water.Nominal size of stop valve is designated by the nominal bore of the pipe to which valve is normally fitted.

What are various types of pipes for water conveyance?

The pipes are available in several types and sizes. The pipes may be classified into three groups according to material used for their manufacturing.

Which are various types of pipes for plumbing in home?

Cast iron (CI) pipes are manufactured by vertical casting in sand moulds.

Which are various types of pipes as per working?

There are four types of pipes as per working which are given below: .Communication pipe .Consumer’s pipe .Supply pipe .Distributing pipe

What are various types of G.I. (Galvanized iron) fittings?

A tee is used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well.

Which tools are recommended for plumbing of sanitary fitting?

Plier is a hand tool primarily used for gripping and cutting. It is a common tool to many handy trades and occupations. .Spanner set is a tool usually operated by hand to tighten bolts and nuts. A wrench basically consists of a lever with a notch at one or both ends for gripping the bolt or nut.

What is the recommended temperature and the rate of flow for the supply of hot water(storage type of installation) to various fixture?

To minimize the danger of blistering, risk of steam formation etc. Storage temperature of 60 degree C is recommended. This may be increased up to 65 degree C when soft water is used and the storage capacity is limited.

Which system between the 'Upward Distribution System' and 'Down Take Supply System' is suitable for water supply in home?

Both the 'Upward Distribution System' and 'Down Take Supply System' of water supply are suitable for home

Which types of pipes are suitable for internal plumbing systems for residential homes?

G.I. pipes are made from hot rolled coils of specified thickness.They are available in light, medium and heavy grades depending on the sheet used.

What are the parameters for safe drinking water?

The following are the parameters for safe drinking water

Which are various brands of pipes for water supply?

These are various brands of pipes for water supply:

What are the advantages and disadvantages of plastic pipes for plumbing?

Plastic pipes are light in weight, tough, resistant to chemical attack and available in large lengths. They reduce the cost of handling, transportation and installation.

What are the advantages and disadvantages of cement pipes for plumbing?

Cement pipes made of metallic pipes are corrosion resistant. Asbestos cement pipes have smooth internal face

Advantages of Kota Stone Flooring

Kota stone flooring is a subtle blend of grandeur and luxury giving the interior and exterior a gorgeous look.......

Orientation of Building

To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.

Kitchen Pictures

Preview some of the most impressive pictures of kitchen from GharExpert Gallery.

Types of Roofing

A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.

Door and Window Frames

Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.