Precautions for buying and installing wooden ceiling
To beautify wooden ceiling, there are precautions that should be taken while purchasing the wood and installing the ceiling.
Precautions while purchasing wood for wooden ceiling:
The wood used for beading should be from first grade.
Check if the timber is free from knots. Wooden should be clean and free from any kind of knots.
The wood used for beading should be free from defects like decay, fungal etc.
The wood also free from streaks splits etc.
The wood used in beading should be kiln seasoned in accordance with IS 1141. It should be free from moisture and should be dry
The wood used for beading should be treated with wooden preservative as per IS; 401. To safe guard from termite, the wood should be treated from anti-termite chemical treatment.
Precautions while installing the wooden ceiling :
The beading prepared from timber should be smooth so that when fixed, there is no gap left between the beadings, ceiling board and between the joint faces.
The beading is straight, parallel when joined, and plane in finish.
The underside of the beading should be uniform.
The junction of the beading should be fully mitered or partly mitered.In case of fully mitered, the beading length should be equal in length of the panel in both sides of the panel. In case of partly mitered, the length of beading should be more than the length of panel.
The minimum length of these beading should be 1.8 meter.
The joints shall come at a corner of a panel and not in the middle of the panel side.
The beading should be fixed in the centre of the joint between the two boards with the help of wooden screws.
The distance of screws should not be less than 20 cm.
The length of screws should not be less than 40 mm.
The screws should be counter sink and have slotted head.The minimum number of screws in one panel should be eight.
Oil the screws before using them in the ceiling.
Please avoid using hammer for screw; it should be screwed with screwdriver.
The screw should be slightly counter sunk below the surface of beading.
To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.
A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.
Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.
Brick work is an important part of construction work done with the help of bricks and cement mortar. It is done with different quality of bricks with different ratios of cement mortar according to the requirement.
Are you remodeling your bathroom? Bathroom shower doors make your bathroom a style icon. Read the following article that will help you select the bathroom shower door that will exactly suit your bathroom.
Cracks can happen due to foundation movements and settlements of building, thermal movements, chemical reactions, elastic deformations and shrinkage etc. in buildings. They can damage plaster of walls, ceilings and destroy the beauty of the structure also. Let’s know their reasons in detail and get preventive measures.
To minimize the danger of blistering, risk of steam formation etc. Storage temperature of 60 degree C is recommended. This may be increased up to 65 degree C when soft water is used and the storage capacity is limited.
Fine sand should consist of natural sand or crushed stone sand. It should be hard, durable, clean and be free from organic matter etc. and should not contain any appreciable amount of clay balls and harmful impurities such as alkalis, salts, coal, decayed vegetation etc.