Surinder Singh
Profile
More Options
 Surinder Singh's Network (0)
 Surinder Singh's Groups (0)
 Surinder Singh's Collection
No pictures...!See All
No articles...!See All
No Tip(s)...!
No style made simple...!
No picture story(s)...!
No Plan(s)...!
 Surinder Singh's Articles (0)

 
  Surinder SinghUpdated on 8/25/2018  
From Punjab. planning/building my own house
Current profession: Gender: 
  Send an email to Surinder Singh 
*Your Message
 
  Pictures uploaded by Surinder Singh 

Forums contributed by Surinder Singh

156
views
4
answers

http://www.gharexpert.com/Forum/Forum_Listing.aspxOn above page, I am unable to

http://www.gharexpert.com/Forum/Forum_Listing.aspxOn above page, I am unable to put a question at following link"Ask a new Question"The form appears and lets me edit, but "Submit button" does nothing....But I am able to ask question via following editbox on right side on same page"Ask your question here!"But this one does not let you add images.I am using FedoraLinux as OS and Firefox as browser..
111
views
9
answers

For porche area flooring, granite stone is slippery and kota stone prone to flak

For porche area flooring, granite stone is slippery and kota stone prone to flaking. Can rough grinding be done on granite for better traction? Is there solution for Kota stone flaking? I have seen severe depth first flaking at joint of four kota stone of 1 inch depth so feeling scary..
112
views
3
answers

What is best method to clean GI Door frames after cement plaster is over. If har

What is best method to clean GI Door frames after cement plaster is over. If harsh sandpaper is used, it will rear primer and even zinc coating thus ending protection. using metal object to scrap off cement will also hurt primer and zinc layers. Tried cleaning with regmar number 600, seems to give desired results. What would be best way?.
99
views
0
answers

Is nano white G5 safe for kitchen? Some say the composition is secret so can thi

Is nano white G5 safe for kitchen? Some say the composition is secret so can this be trusted for kitchen slab ?.
106
views
3
answers

The roof slab is layed with clean shuttering plates and some places probably due

The roof slab is layed with clean shuttering plates and some places probably due to collar plate the separation line is 3-5mm updown. No plaster or POP is done. Putty is to be used directly over ceiling surface as it came off the plates after grinding with sand paper to clean neru or pure cement layer to increase adhesion. Some putty workers are suggesting to mix POP with putty and fill these to .
116
views
1
answers

If there is brick found in roof slab, should it be removed and patched with conc

If there is brick found in roof slab, should it be removed and patched with concrete or left as it is..
104
views
1
answers

One putty mistry told that putty must be done before marble laying on floors as

One putty mistry told that putty must be done before marble laying on floors as marble grinding splash will stick to the walls and putty will not stick on it later. And putty wont be damaged by marble slurry. Is this true?.
152
views
3
answers

For laying marble what is better of 'lal rorhi' and stone gatki with mixer. lal

For laying marble what is better of 'lal rorhi' and stone gatki with mixer. lal rorhi seems to be flexible for fixing things exactly to floor level like ac drains or underfloor electric conduits etc. And for upper floors lighter than stone gatki. pros/cons?.
191
views
3
answers

I want to build bedroom loft of 2 feet extend from wall. The side walls are 11'

I want to build bedroom loft of 2 feet extend from wall. The side walls are 11'2" apart. Left wall is 9" external common wall and right wall is 4.5" partition wall. so slab would be 11'2" x 2'What should be thickness of rcc slab?How much should 4.5 wall be chiselled and how much 9" left wall and how much the 9" wall where this slab would stuck like a cantilever. What would be optimum considering .
343
views
4
answers

What should be lintel design above door frame of 2'6" wide, 4.5" section and 2.5

What should be lintel design above door frame of 2'6" wide, 4.5" section and 2.5 inch thick hollow galvanised steel of 1.5mm thickness? Wall thickness is 4.5 inch brick? This will be 4 feet brickwork above lintel..
 Surinder Singh's Videos (0) 
No video(s) found..!
 
 Fresh at Surinder Singh's profileSee All    
  25 August, 2019
No content(s) available..!

 Surinder Singh's ProjectsSee All
 Contact Information
Address: 
City: 
Zip: 
Country: 
Website: 
 Education and Work Experience See All
 Education Info
No education(s) found..!
 Experience Info
 No experience(s) found..!
Copyright 2007- GharExpert.com All rights reserved.  

 
 |  Advertize with us  |  About us  |  Contact us  |  RSS  |  Blog  |  Terms of service  |  Style made simple  |  Decorating slide show  |  Tips  |  Give your feedback  |