Which tools recommended for doors, windows and ventilator frames?

For construction of doors, windows and ventilators different types of tools and plants are required. These tools are different according to the material used in the frames of doors, windows and ventilators as in case of wooden frames, iron frames and aluminum frames. The following tools are recommended or required for wooden doors, windows and ventilator frames.

1. Auger: - This tool is used make deep hole or boring in the wooden member.
2. Auger bit, Center Bit, Rose Counter Sunk Bit , Screw Driver Bit:- These bits are used to make holes in the wooden pieces in different shape and size.
3. Brace:- This tool is used to make hole, in this tool a bit is attached at the lower end of this tool and a hole is bored by hand press.
4. Compass saw, Coping saw, Cross cut saw, hand saw:-There are many type of saw and used to cut the timber / wood.
5. Gimlet: - This tool is small and used for making and boring small holes.
6. Bradawl:- This tool has sharpened end required to use for making punching in the timber.
7. Firmer chisel, Mortise chisel, paring chisel:-These various types of chisel are used to make required cut in the wooden piece to fit the other piece in the cut.
8. Claw hammer:-This hammer one end is solid used for hammering the nails or wooden piece where as other end is use to extract nails from wooden pieces.
9. Marking gauge, Marking knife: - This tool is required for marking lines or Nissans on wooden pieces.
10. Bed plane, Jack plane, Rebate plane:- There are various types of plane use to make the surface of timber smooth, making rebate in the timber and making or forming molding.
11. Nail punch: - This tool make the space for nails or screws to make the carpentry work speedy and easy.
12. Cramp: - This tool is required to hold the timber piece to make the carpentry work speedy and easy.
13. Square:-This made either wood or iron use to check the right angle of the wooden frame.
    14. Oil Stone:- This is a piece of stone required to sharpen the carpentry tools, which makes the work speedy and easy.
    15. Pincers, Pliers: - These tools are used to extract nails from the timber and make the work easy & speedy.
    16. Screw Driver:- To fix and extract the screws from timber and make the work easy & speedy.
     Mallet Hammer, pall hammer, Waller Hammer;- These are used to forming the joints by hammering one piece to the other piece.