What are various tools used for the installation of Fluorescent tube light?
Fluorescent light tubes are of many shapes and sizes. Compact fluorescent light bulb (CF) is an increasingly popular one. A fluorescent lamp produces much useful and visible light which require only 1/3 to 1/4 of the input electricity.
Tools for installation of the tube lights
Screw Driver (15cm):
It has an insulating handle which is used for fixing the screws. It is available in various sizes.
Wire Cutter (15cm):
It consists of two sharp edges which can cut the wire.
Electricians Pliers (15cm):
It is used for cutting, twisting and pulling wires. Cutting pliers are specified in lengths and are available in range of 15 to 30 cms. Handles of the pliers have insulation jacket to provide safety from electric shock.
It is used for testing the supply. Phase wire is identified by the glow of light in the tester when the tip of the tester is placed on the wire. Tester is provided with a screw driver but this should be used carefully.
Raw material used for installation of tube light:
Fluorescent tube light
Fluorescent tube light:
It is a lamp which produces light at large scale through conversion of ultraviolet energy ------- from a low pressure mercury. The lamp consists of a glass tube containing two electrodes, a coating of activate, phosphor powder and small amounts of mercury.
Cables and wires:
A usual and pliable metallic strand or rod made in many lengths and diameters, sometimes clad and often electrically insulated, used chiefly for structural support or to conduct electricity.
Bulb holder is the mechanical device that physically holds the bulb in position and provides electrical connection to the light bulb.
It is usually made of steel. Though it can be made of aluminum, brass, or many other metals. Its' surface can be coated or plated to improve corrosion resistance, gripping strength or decorative appearance. The head, shank and point may have different shapes based on the intended function of the nail.
Do you know what you should know before hiring an electrician? You are responsible for all electrical faults and its repair. You need to hire an electrician for repair of electrical faults. The following checklist should help you when hiring an electrician.
Low quality materials, unqualified electrician and a little carelessness in electric works can cause fatal electric shocks in home. Such accidents are not easy to repair and compensate. So it is essential to take every care while doing electrical fittings during construction of your house. This article gives some tips on electrical works during house construction.
Electricity can be deadly if not used with utmost care. When the phase or live wire touches our body, electric current gives shock depending on the intensity of voltage and paralyze muscular functions of the body. To avoid electric shocks during electric works/contact, make sure you have followed all precautions of electric shock mentioned in the following article.
Electric fitting must be safe and ensure proper safety to the occupants of the house. Low quality products or appliances can cause fatal accidents like short circuit fire/smoke, break out of fire in entire house, current-shock to any member etc.
In electrical works, earthing or earthed means to connect electrical system to general mass of earth in such a manner as it ensures an immediate discharge of electrical energy without danger at all times.
We all need power to run electrical appliances and different gadgets in our home. For proper distribution of electricity we need to install and maintain the quality wiring by an expert electrician. Following tips will help you understand wiring installation process for your home or office.
Electrical mistakes are common in each and every house that may be dangerous for residents. When you are designing your dream home it may be that you are not aware about the electrical mistakes and its effects. Here are discussed some common electrical problems that can be harmful for residents.
To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.
A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.
Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.