470
views | 5
answers | I need to design a industrial shed of 25'-0" height and truss span is 200' with a support column in middle.I required to provide I-Beam for column without concrete. Question is which is better single I-beam section or group of two or four I-beam section for support of tubular truss. If possible standard design drawing of truss and steel column. |
|
|
1368
views | 4
answers | The building construct before three years. And no any terracing work done at the time of construction.At present water log on terrace, and seepage start from roof.Roof is R.C.C. on frame structure building. Terrace area is more than 4000 sft.I like to know the details for best way of terracing and water proofing with per sft cost in UP.. |
867
views | 2
answers | Consult local development authority or any local architect for set back rules in your area.. |
755
views | 3
answers | Washing platform on east wall best in indra or satya place.distance left = length divided by 9 and multiply by 3after distance left from both side north or south place washing platform on east wall.Means on 4th part from north also on 4th part from south.. |
797
views | 1
answers | Not must it is traditional design. at present many buildings construct without leaving space outside the boundry.. |
635
views | 1
answers | No any obstacle in ceiling is not good over bed specially on east direction as per vastu.. |
1362
views | 6
answers | First the walls are not 8" and 6" in india it is 9" and 4.5" thick.You marked that the plinth is 5' high and ground floor as stilt floor and first floor as residential floor.it will cost you between 18 to 25 lacs depend on specifications used.. |
995
views | 3
answers | East facing plot is good as per vastu.Your plot is extend in north side but you not mention that the plot is extend on north east or north west.If plot extend north east it is good.If plot extend north west it need correction as per vastu.. |
941
views | 2
answers | in addition in gupta ji answerPurpose of area and you need covered area of built up area or slab area or projection area all area need different calculation.Also state in which purpose for estimation, drawings, billing.. |
1090
views | 2
answers | Dear,Grade beam rest on ground but its purpose is to provide band between column or provide as a plinth beam.ground means supported on earth but the bearing capacity of earth is not suffecient to transfer super imposed load on grid beam to transfer on soil under bearing capacity.So it is transfer load to soil and rest load to column.so it needs strength and required to design and need depth and st. |