Home -> Forums

Hi, Is there any cost effective methods to hire bending machines for reinforceme

Sun Nov 04, 2018Total posts : 3
Betty Varghese
Betty Varghese
Join date: Jul 2018
Topic: Hi, Is there any cost effective methods to hire bending machines for reinforceme

Hi, Is there any cost effective methods to hire bending machines for reinforcement TMT bars. I have been wondering is there a bended bars like similar to precast industries. Will that be effective for construction.
Tue Nov 06, 2018Post  #1
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear sir,
          The bending is done manually and it is according to the requirement at site condition which depends upon the size of room or span of the beam and slab.
    Thanks
 
 
Wed Nov 14, 2018Post  #2
Annesh Surjith
Annesh Surjith

Join date: Jun 2018
Post subject: Use lower grades of TMT bars

For house construction, machine bending might not be feasible option. So most commonly manual labor is used for bending TMT bars. A point to note is that in such scenarios, bending of bars especially higher grades can compromise the integrity of bars. Most often engineers choose lower grades like Fe 415 and goes for higher grades only for high rises. This can improve the workability factor as well as grade like Fe 415 has the optimum ductility to tensile strength ratio. So always choose TMT bars from expert advises only.
 
Thu Nov 15, 2018Post  #3
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear Sir,
         Thanks for visiting the site
 

Questions (39)

889
views
2
answers

Bamboo flooring

Last answer on 5/27/2015 6:51:33 PM. by sanu kumar. Forum started by sanu kumar
1059
views
1
answers

Protecting concrete brick boundary wall without plastering in rainy season?

Last answer on 11/2/2016 11:34:51 AM. by S L Gupta (Civil Engg). Forum started by vinu
4461
views
2
answers

compound wall estimate

Last answer on 12/5/2014 6:44:25 PM. by JAI PRAKASH. Forum started by suba
1284
views
0
answers

Sir, i am starting new business hollo block machine, where i have ti fix the m

Last answer on 10/1/2012 4:18:14 PM. Forum started by sureshkodiya@rediffmail.com
2541
views
1
answers

which flooring material,marble,tiles,stone etc is cost effective, maintenance fr

Last answer on 8/28/2009 10:43:26 PM. by Karan. Forum started by v d nagar
801
views
1
answers

nice looking & cost effective

Last answer on 7/29/2014 12:16:01 PM. by S L Gupta (Civil Engg). Forum started by psatyajit46
1533
views
8
answers

construction

Last answer on 5/13/2019 1:18:38 AM. by S L Gupta (Civil Engg). Forum started by simran
1730
views
1
answers

steel shuttering cost

Last answer on 2/22/2013 12:28:21 PM. by S L Gupta (Civil Engg). Forum started by paresh
3724
views
3
answers

2 lakh litre water tank

Last answer on 5/17/2016 1:30:52 PM. by S L Gupta (Civil Engg). Forum started by Shardul
1041
views
3
answers

which wood is to be used for windows. how to make doors cost effective?

Last answer on 6/18/2015 11:22:14 PM. by JAI PRAKASH. Forum started by ashok
753
views
1
answers

Hello to all, I am looking out for effective interior designing suport at Vad

Last answer on 3/6/2016 1:21:16 AM. by JAI PRAKASH. Forum started by Sunil
1083
views
2
answers

how can cost effetively build a shopping complex of 816 sq.ft plint area

Last answer on 11/10/2016 5:23:47 PM. by Rajeev ranjan. Forum started by Sreejith Ambat
1008
views
1
answers

Help needed for glass block installation

Last answer on 8/25/2014 8:28:09 PM. by JAI PRAKASH. Forum started by viju
25807
views
1
answers

how much cu.m of earth can excavated by machine per day

Last answer on 7/8/2011 8:22:17 AM. by prasadtvp. Forum started by sherab tenzin
1149
views
1
answers

I want to know that Bar bending Shedule Pier and I shape or L shape Beam.

Last answer on 5/24/2011 10:26:50 PM. by S L Gupta (Civil Engg). Forum started by muhammad usman
1365
views
1
answers

Specification of ‘Plastering’

Last answer on 11/7/2013 11:43:21 AM. by S L Gupta (Civil Engg). Forum started by Subash Chander
829
views
2
answers

SLAB REINFORCEMENT

Last answer on 5/9/2016 2:06:50 PM. by ANKITA MADA. Forum started by ANKITA MADA
719
views
1
answers

Does bending of pillar rods on the first floor will it result in reduction of st

Last answer on 10/13/2016 11:06:46 AM. by S L Gupta (Civil Engg). Forum started by Saneto Fernandes
750
views
2
answers

kindy suggest bar bend design for 1000 sqft slab

Last answer on 5/3/2016 12:20:20 AM. by JAI PRAKASH. Forum started by ahmed.sait147
1325
views
20
answers

Reply to Roof Concrete Strength

Last answer on 7/16/2019 3:53:53 AM. by bestseosquad. Forum started by Jahankumar
7511
views
3
answers

Calculation of column load and footings

Last answer on 7/16/2019 3:37:42 AM. by Porter Williamson. Forum started by manishkumar
7269
views
10
answers

Front Elevations

Last answer on 7/16/2019 3:09:32 AM. by Craig. Forum started by Hanumanth Kumar
1977
views
4
answers

house plan

Last answer on 7/15/2019 11:57:38 PM. by aidengillan. Forum started by ishan
40
views
6
answers

I had constructed 4" wall on the exterior side on the first floor with 2" plast

Last answer on 7/15/2019 9:59:42 PM. by S L Gupta (Civil Engg). Forum started by Badhavath Rajeshwar
16248
views
15
answers

the cost of construction in dehradun is around rs.800 to rs 1000.00 per sq ft bt

Last answer on 7/15/2019 9:59:09 PM. by S L Gupta (Civil Engg). Forum started by sonu
4056
views
31
answers

kitchen in north direction

Last answer on 7/15/2019 9:58:24 PM. by S L Gupta (Civil Engg). Forum started by saurabh
2453
views
12
answers

any gud designer for modular kitchens in bangalore

Last answer on 7/15/2019 9:57:27 PM. by S L Gupta (Civil Engg). Forum started by pv rao
42
views
6
answers

Please suggest the quotation to be fixed forthe carpentery work for interiors?

Last answer on 7/15/2019 9:56:38 PM. by S L Gupta (Civil Engg). Forum started by zakia sultana
1370
views
11
answers

My home is excetly on Tee Point. As per Vastu it is a problemtic home. if it is

Last answer on 7/15/2019 9:56:03 PM. by S L Gupta (Civil Engg). Forum started by Manjeet singh
1257
views
8
answers

Bedroom Decorating Ideas

Last answer on 7/15/2019 9:55:25 PM. by S L Gupta (Civil Engg). Forum started by katejohn
1765
views
8
answers

RCC pillar

Last answer on 7/15/2019 9:54:46 PM. by S L Gupta (Civil Engg). Forum started by gpeter
2409
views
5
answers

sir what should be the minimum thickness of a load bearing wall?

Last answer on 7/15/2019 1:38:16 AM. by S L Gupta (Civil Engg). Forum started by gautam kumar
8
views
1
answers

building 8" wall onthe slab will effecet the on the outer side

Last answer on 7/15/2019 1:37:32 AM. by S L Gupta (Civil Engg). Forum started by Badhavath Rajeshwar
19
views
3
answers

Ishan kon facing plot of size 28*67 feet.Front 28' feet.Requirements:(For Ground

Last answer on 7/15/2019 1:35:25 AM. by S L Gupta (Civil Engg). Forum started by Aks
102
views
7
answers

Hi i need house plan for 35 *45 plot. Plz help

Last answer on 7/15/2019 1:34:39 AM. by S L Gupta (Civil Engg). Forum started by Samina
2175
views
23
answers

LOAD BEARING STRUCTURE

Last answer on 7/15/2019 1:33:34 AM. by S L Gupta (Civil Engg). Forum started by ANKITA MADA
149
views
3
answers

[14/07, 01:42] Arvind Kumar Sharma: Ishan kon facing plot of size 28*67 feet.Fro

Last answer on 7/15/2019 1:32:08 AM. by S L Gupta (Civil Engg). Forum started by Aks
119
views
3
answers

[14/07, 01:42] Arvind Kumar Sharma: Ishan kon facing plot of size 28*67 feet.Fro

Last answer on 7/15/2019 1:26:25 AM. by S L Gupta (Civil Engg). Forum started by Aks
1234
views
9
answers

Vastu for Plot

Last answer on 7/15/2019 1:23:38 AM. by S L Gupta (Civil Engg). Forum started by RENJI




Articles that might interest you!
How
How to Hire an Electrician
Do you know what you should know before hiring an electrician? You are responsible for all electrical faults and its r..
How
How to hire a plumber
To find a skilled plumber you have to do enough searches for it. Contact friends and relatives for a skilled plumber a..
Top
Top 10 Mistakes to avoid when Hiring a Contractor
When planning to build your dream home it may be difficult to hire a good contractor. A successful house construction ..
How
How to hire a carpenter?
Superb craftsmanship on wood articles plays a dominant role in making your home wow. A professional carpenter is requi..
Why
Why an Architect should be hired?
We recommend that an architect should be appointed for the construction of any house as the professional help would be..
Compact
Compact Hi-Tech Kitchen
We are living in sci-fi (Scientific) world where we notice all high tech gadgets around us like mobile, palm tops etc...
What are the advantages and disadvantges of wooden doors?
Wood provides insulation that is 400 times more effective than steel and 1800 times more effective than aluminum.
Basic
Basic home security tips
We all know about them but we still fail to follow these safety tips. Here is a ready checklist of the do-es and don't..
What is the recommended method for leveling of concrete in wooden block flooring?
The leveling layer of concrete shall be cement concrete 1:2:4 (1 cement,2 coarse sand,4 stone aggregate 10 mm nominal ..
What is recommended method to remove the cracks from building?
The cracks are repaired by using low-pressure injection of epoxy or polyurethane foam repair material.
What are various types of glasses used in doors?
Types of glasses used in doors-Clear window glass, Plate glass, Prism glass, Quartz glass, Processed glass.......
What are advantages and disadvantages of folding doors?
Advantages of folding doors- Easy to install,washable, durable, superior sound damping. Disadvantages-sensitive to har..
What are various designs available in wooden doors?
Designs available in Wooden doors.....
What is standard size of internal folding doors?
Size, Thickness and Weight of Internal Folding Doors.......
What affects the life of doors? What can we do to increase the life of the Wooden doors?
Tips to increase the life of Wooden doors....
What is the standard size of frame for Plastic/PVC doors?
Plastic Door frame size carrying one or two shutters......
What are various frames recommended for Plastic/PVC doors?
Frames for Plastic Doors..........
Which place is appropriate for sliding door?
Appropriate places for sliding doors-Bathrooms, Backyards, Commercial structures...........
What are various frames recommended for glass doors?
Frames for Glass Doors-Wooden frames, Steel frames, Aluminium frames......
Which place is appropriate for folding doors?
Appropriate places for folding doors-Homes, Offices, Guest rooms, gives attaractive and stylish look........
What are the various accessories recommended for folding doors?
Accessories for folding doors- Door Handles, Door Fasteners,Door Viewers.......
What affects the life of doors? What can we do to increase the life of the Plastic/PVC doors?
Tips to increase the life of Plastic doors....
Copyright 2007- GharExpert.com All rights reserved.  

 
 |  Advertize with us  |  About us  |  Contact us  |  RSS  |  Blog  |  Terms of service  |  Style made simple  |  Decorating slide show  |  Tips  |  Give your feedback  |