Home -> Forums -> Construction -> Raw Material -> Looking for steel estimation and number of straight and vertical and plain beam estimation

Looking for steel estimation and number of straight and vertical and plain beam estimation

Sat Jan 07, 2017Total posts : 4
mohd asif
mohd asif
Join date: Jan 2017
Topic: Looking for steel estimation and number of straight and vertical and plain beam estimation

Hello sir looking for a help in building home 
width 25 and length 38
i planning for g+3 with 2 rooms one hall and one drawing room basically in 6 blocks and middle block will be call of width 16 feet
1)can you please share me the estilamtion of steel
 2) how many pillars i need to take and size and steel rod size.
3) how much on the slab and the slab size,
4) vertical and the straight beam size and stell 

Requesting you to response and give me the information 
mohd.asif4233@gmail.com
Mon Jan 09, 2017Post  #1
karthik
karthik

Join date: Sep 2016
Hi Mohd Asif,

If you are going for a G+3 construction, I would highly recommend you to approach a structural designer for calculating the steel for various RCC members (such as Beams, Columns, and Slab). This would help you save cost and comeup with proper design based on your requirement and site condition.

If you looking for Estimating the amount of Steel, then consider around 4 Kgs of steel requirement per sqft of built-up area (i.e, For a House Construction of 1000 Sqft, then you require 4000 Kgs of Steel approximately).
 
Tue Jan 10, 2017Post  #2
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear Sir,
        The detail can be calculated on the basis of bearing capacity of soil, load bear by the column, beam with safety from earth quack etc. So it is advice that take proper structural design the rate for structure design is Rs 4-00 per sft including foundation design, beam, column slab stair, mumty etc.
 
Tue Jan 10, 2017Post  #3
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear Sir,
       During construction if we spent some time about design, specification and quality of construction than there is lot of improvement one can find in construction.
gharexpert.com website provide maximum engineering detail relating to construction if one have time and read these.
    Visit again for any problem relating to construction.
 
Thu Jan 12, 2017Post  #4
S L Gupta (Civil Engg)
S L Gupta (Civil Engg)

Join date: Mar 2008
Dear Sir,
         See the link below which are very helpful during construction.

http://www.gharexpert.com/tips/articles/Construction/1528/Start-Construction-1528-Guidelines-while-Starting-Construction_0

http://www.gharexpert.com/Estimator/detailed_cost_estimate.aspx

 

http://www.gharexpert.com/articles/Start-Construction-1406/Through-rate-contractor;-guidelines-better-rel_0.aspx


 

Raw Material-Construction Questions (38)

1625
views
1
answers

i need structural details and estimation for 150yd plot

Last answer on 8/17/2012 11:36:21 AM. by Gunjan Utraja. Forum started by gangula
2956
views
5
answers

I want to details estimation calculation of building.

Last answer on 1/13/2014 2:23:28 PM. by S L Gupta (Civil Engg). Forum started by balaji
1695
views
0
answers

ESTIMATION

Last answer on 10/17/2012 4:20:51 PM. Forum started by AHAMED YUSUFF
1893
views
6
answers

software

Last answer on 5/18/2016 11:27:51 AM. by S L Gupta (Civil Engg). Forum started by chethan
1535
views
1
answers

estimation

Last answer on 6/20/2013 12:45:05 PM. by S L Gupta (Civil Engg). Forum started by chethan
982
views
1
answers

hi , sir i want to ask queries regarding suspension bridge (from foundation to e

Last answer on 10/25/2013 12:28:39 PM. by S L Gupta (Civil Engg). Forum started by shailesh yadav
1393
views
1
answers

Estimation software

Last answer on 2/17/2014 3:13:22 PM. by S L Gupta (Civil Engg). Forum started by chethan
825
views
3
answers

estimation

Last answer on 8/24/2016 6:11:11 PM. by assainar. Forum started by assainar
588
views
1
answers

how to calculate brick estimation

Last answer on 9/9/2016 11:14:22 PM. by bhuvaneshwaran bn. Forum started by mohammed nayeemuddin
343
views
3
answers

how can i ready to road cost estimation?

Last answer on 6/2/2018 12:19:37 AM. by S L Gupta (Civil Engg). Forum started by jagdeesh parsad
960
views
2
answers

i need best quality 2bhk house estimation.cost,design total send to my mail id

Last answer on 12/14/2015 12:05:42 PM. by S L Gupta (Civil Engg). Forum started by surender
1693
views
2
answers

Cost of construction of roof slab.

Last answer on 9/13/2013 11:42:05 AM. by feroz khan patthan. Forum started by suhas
1272
views
2
answers

I am looking at bathroom tiles with a rounded finish for the vertical walls

Last answer on 10/13/2011 8:12:16 PM. by JennyK. Forum started by Vishwas Chhatre
1704
views
1
answers

comments required

Last answer on 8/14/2012 11:49:24 AM. by Gunjan Utraja. Forum started by gangula
1517
views
0
answers

does any body have construction cost estimation free software?

Last answer on 7/13/2012 4:04:59 PM. Forum started by rajeev
1860
views
3
answers

dear sir, iam purchased plot 222 sq.yards ,south face ,send u r contact details,

Last answer on 9/28/2015 12:01:52 PM. by JAI PRAKASH. Forum started by kishore
4293
views
1
answers

Construction Cost estimation for RCC and Brick Work

Last answer on 11/1/2013 12:39:57 PM. by S L Gupta (Civil Engg). Forum started by Abhishek
3639
views
3
answers

1400 Sq.ft RCC roof how much Steel,Sand,Jally & Cement required?

Last answer on 5/10/2016 11:59:50 AM. by S L Gupta (Civil Engg). Forum started by Mohan
840
views
1
answers

Need a house plan and estimation for 27 X 45 North facing site...

Last answer on 7/20/2015 7:15:48 PM. by JAI PRAKASH. Forum started by narayana
1497
views
9
answers

use of tmt bar

Last answer on 6/12/2018 1:37:59 AM. by S L Gupta (Civil Engg). Forum started by sonu.211
1395
views
3
answers

Steel

Last answer on 4/23/2018 11:28:20 PM. by S L Gupta (Civil Engg). Forum started by paresh
352
views
1
answers

work turned out by labour

Last answer on 5/15/2017 1:35:22 PM. by S L Gupta (Civil Engg). Forum started by carola braats
1140
views
5
answers

estimate

Last answer on 2/16/2017 2:07:14 PM. by S L Gupta (Civil Engg). Forum started by raj
546
views
1
answers

Marriage hall construction

Last answer on 10/10/2016 10:50:25 AM. by S L Gupta (Civil Engg). Forum started by chandana kumar
745
views
1
answers

wirecut clay bricks vs concrete bricks, which one is better for load bearing walls?

Last answer on 7/27/2016 2:38:02 PM. by S L Gupta (Civil Engg). Forum started by vinu
2700
views
3
answers

1680 Sq.ft RCC Slab required Material with BOM

Last answer on 7/4/2016 2:55:12 PM. by S L Gupta (Civil Engg). Forum started by Mohan
2438
views
4
answers

Use of Fly ash while in Construction

Last answer on 5/26/2016 3:18:53 PM. by Nitin Khairnar. Forum started by naresh
788
views
2
answers

Estimate

Last answer on 5/11/2016 5:17:08 PM. by Farhan. Forum started by Farhan
694
views
1
answers

Cost of Steel construction

Last answer on 4/22/2016 11:27:17 AM. by S L Gupta (Civil Engg). Forum started by VikasUmate
602
views
2
answers

urgent : huge problem - best way to reduce cost diff : pls help

Last answer on 12/17/2015 2:49:59 PM. by JAI PRAKASH. Forum started by sushantsah
914
views
0
answers

READY MIX PLASTER

Last answer on 7/18/2015 9:42:06 PM. Forum started by Bimlendra Jha
820
views
1
answers

Software for Material Estimation

Last answer on 3/19/2015 12:21:52 AM. by JAI PRAKASH. Forum started by Aamir
1293
views
1
answers

Function Hall

Last answer on 3/1/2015 8:56:20 PM. by JAI PRAKASH. Forum started by Mark Paraon
794
views
1
answers

specification for new home 620 sq.ft

Last answer on 3/1/2015 8:14:42 PM. by JAI PRAKASH. Forum started by baskar
918
views
1
answers

zero slump concrete

Last answer on 2/9/2015 11:32:08 AM. by S L Gupta (Civil Engg). Forum started by Malik Usman
1007
views
3
answers

Wood Textured Tiles

Last answer on 1/16/2015 11:37:30 AM. by John Son. Forum started by awdhesh
6105
views
1
answers

33 feet 45 feet map for home

Last answer on 12/5/2014 11:38:12 AM. by seema tyagi. Forum started by salik ram tripathi
1779
views
1
answers

Estimation of quantities of raw materials for sungle to 4 storyed Buildings

Last answer on 8/14/2014 12:11:02 PM. by S L Gupta (Civil Engg). Forum started by Mohan Bhagwat




Articles that might interest you!
Centering
Centering and Shuttering / Form Work
Shuttering or Form work is most important part of any construction project. Steel, Wood or other likewise material is us
Guidelines
Guidelines for Doors and Windows Opening in Walls
Doors or Windows opening in walls are skilled part of construction in home, work are or any other structure. It needs ..
Mild
Mild Steel Bars in Cement Concrete
Mild steel bars in reinforced concrete are one of the exceptional building materials. Reinforced concrete requires ver..
10
10 tips to make a small space look bigger
A small space looks tidy and large if items of daily use are organized properly in it. To create a spacious feeling, p..
Arcade (Architecture)
what is an arcade? Read the article to know more about it.
How
How to ensure weight of steel members?
Before you purchase mild steel members for construction of your house, you must know weight and cost of steel members ..
Type
Type of Steel Bars
Different steel bars are recommended for their relative tensile stresses.Steel bars are major components of constructi..
Window
Window Treatments: Window Blinds for Windows
Know about the different styles of window blinds and add style with window treatments such as blinds, shades, curtains..
Labor Guideline for Steel bars in RCC
Every process needs proper guideline and expert person or team to manage in construction or in any field. Even working..
HSD
HSD Steel Bars (High Strength Deformed Bars)
To ensure the strength and quality of your house construction, utilize HSD Bars since they are produced in form of col..
What are various types of glasses used in doors?
Types of glasses used in doors-Clear window glass, Plate glass, Prism glass, Quartz glass, Processed glass.......
What are advantages and disadvantages of folding doors?
Advantages of folding doors- Easy to install,washable, durable, superior sound damping. Disadvantages-sensitive to har..
What are various designs available in wooden doors?
Designs available in Wooden doors.....
What is standard size of internal folding doors?
Size, Thickness and Weight of Internal Folding Doors.......
What affects the life of doors? What can we do to increase the life of the Wooden doors?
Tips to increase the life of Wooden doors....
What is the standard size of frame for Plastic/PVC doors?
Plastic Door frame size carrying one or two shutters......
What are various frames recommended for Plastic/PVC doors?
Frames for Plastic Doors..........
Which place is appropriate for sliding door?
Appropriate places for sliding doors-Bathrooms, Backyards, Commercial structures...........
What are various frames recommended for glass doors?
Frames for Glass Doors-Wooden frames, Steel frames, Aluminium frames......
Which place is appropriate for folding doors?
Appropriate places for folding doors-Homes, Offices, Guest rooms, gives attaractive and stylish look........
What are the various accessories recommended for folding doors?
Accessories for folding doors- Door Handles, Door Fasteners,Door Viewers.......
What affects the life of doors? What can we do to increase the life of the Plastic/PVC doors?
Tips to increase the life of Plastic doors....
Copyright 2007- GharExpert.com All rights reserved.  

 
 |  Advertize with us  |  About us  |  Contact us  |  RSS  |  Blog  |  Terms of service  |  Style made simple  |  Decorating slide show  |  Tips  |  Give your feedback  |