Make GharExpert your home page! Channels | Groups | Forums | Videos | Blog | News  
Free Newsletter !
Interior, Exterior, Vastu, Home construction & Home improvement network
Sign in  Download high quality pics FREE! Join Now! Forgot Password?

  HomeConstructionInteriorExteriorVastuEstimatorGalleryQ&AExperts  
Chat now!Write an articleShare your pictureAsk a questionShare external links
 

All Tags  arrow  Building
Go to page: 123Next  >>
What are the effects due to dampness on the building ?
A damp building is unhealthy to those who occupy it, dampness in building is a concern because it often leads to the growth of molds and bacteria.
Read more >> 
Which type of paint is recommended for ceiling with insulating building boards?
Two coats of Approved preservative paint
Read more >> 
Which types of insulating building boards are recommended for ceiling?
Fibre insulation board, ordinary or flame
Read more >> 
What are the specifications of nails for ceiling with insulating building boards?
Where the joints are left exposed, the sheets are fixed to the frame with G.I headless nails 2.24 mm dia.
Read more >> 
What are the specifications of Frame for ceiling with insulating building boards?
The width of the frame should be sufficient to provide a minimum nailing surface of 50mm.The longitudinal and header scants are arranged in such manners that the boards can be fixed to form the panel arrangements.
Read more >> 
What is the recommended method of fixing the ceiling with insulating building boards?
The boards are applied with lengths perpendicular to all joints.The boards may be spaced 3 to 6 mm for covered joints.
Read more >> 
What type of finishing is recommended for ceiling with insulating building boards?
The exposed side of the board is truly and plane.Boards should be without any local bulges or sags.
Read more >> 
What is the recommended dimensions and tolerances of insulating building boards? (Specify length, width and thickness of the board)
The recommended dimensions and tolerances of insulating building boards are following:
Read more >> 
Which are various sources of entrance for termites in a building?
The timber buried in ground. The means of mud shelter tubes constructed over unprotected foundations
Read more >> 
Which are various types of dampness in the building and their treatment?
Brick and masonry absorb water so they must be sealed off, away from moisture and moisture-bearing substances like soil. If it does not occur, the water will rise in the walls causing dampness.
Read more >> 
Which types of bricks are recommended to protect the dampness while constructing the building?
The density of masonry bricks used must be greater than 1200 kg/m³.
Read more >> 
Which are various methods for the protection of dampness in buildings?
REPLASTERING: The most common method is to scale the affected damp plaster back to the brickwork and replaster the affected area with a waterproof plaster or cement mixture.
Read more >> 
What are effects on building due to dampness?
.Dampness in buildings is a concern because it often leads to the growth of molds and bacteria
Read more >> 
Which are various brands of chemicals used for the protection of dampness from building ?
The following brands of chemical are used for the protection of dampness from building:
Read more >> 
Which types of fire detectives are suitable for building?
.Modern smoke sensors or Gadgets:These smoke sensors or gadgets may be permanently installed in buildings for the early detection of fire.
Read more >> 
Which are various fire fighting system for building ?
.Automatic sprinkle system:This system consists of automatic sprinkles attached to a piping system containing water under pressure and connected to a water supply so that water discharges immediately from the sprinkles opened by a fire.
Read more >> 
Which are chief causes of fire in building?
.Smoking .Electrical Wiring .Heating and Cooking Equipment
Read more >> 
Which type of soil and foundation is recommended for protection of building in earth quake zones?
.Loose fine sand, soft silt, black cotton soil and expensive clays should be avoided for foundation. If unavoidable the building shall rest either on a rigid raft foundation.
Read more >> 
What is recommended size and shape of building for the protection in earthquake prone areas?
All parts of a building should firmly be tied together and stiffly braced at corners in such a manner that the whole structure will tend to move as a unit.
Read more >> 
Which are recommended factors for the safety of building in earthquake prone areas?
.Seismic (Earthquake affected) zone in which the building is located. .Type of the soil over which the building is situated. Black cotton soil and expensive clays should be avoided for foundation.
Read more >> 
Go to page: 123Next  >>
    
 
Exterior View
WTP
Facade
Steel Building
CONSTRUCTION
INTERIOR
VASTU
EXTERIOR
TAGS
Aggregate Bathroom Board Brick Building Ceiling Cement Color Concrete Construction Dampness Dining Door Finishing Flooring Furniture Glass Home Interior Interior decoration Kitchen Kota Light Marble Paint Plastic Plumbing Pooja Pop Sand Security Steel Study Termite Tile Vastu Window
View all tags
Ask Question
Ask Question
Ask Question
Ask Question
Ask Question
Cost Estimator

Your ad here
| Home | Construction | Interior | Exterior | Vastu | Cost estimator | Ques & Ans | Experts | Forums | Channels | Groups |
| Gallery | Picture story| Style made simple| Decorating slide show| Tips| Give your feedback |
| Advertise with us| About us | Contact us | RSS |  Blog  | Terms of service |
Copyright 2007- GharExpert.com All rights reserved.